2 in 1 Oscilloscope Multimeter, LM2020 New Update, Professional LED Handheld Oscilloscope Multimeter with 2.5 Msps high Sampling, Automatic Waveform Capture Function, DC/AC Voltage/Current Test. FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring. 3 waveform scanning modes: automatic/conventional/single.
MORE POWERFUL DETECTION RANGE -DC voltage 0 1000V, AC voltage 0 750V, DC/AC Current 0 10A, Resistance 0 40MO, Capacitance 0 100µf, Frequency 0 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50O. Transistor amplification test to meet all test requirements. MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation.
The software calibration technology, memory calibration coefficients. To enable Quiet Mode (disable keypress beeps), press and hold the "F4" button and then rotate the rotary knob to turn on the instrument.LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.
OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety. FASTER SAMPLING SPEED - 2.5Mpsp high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring. MORE POWERFUL DETECTION RANGE -DC voltage 0 1000V, AC voltage 0 750V, DC/AC Current 0 10A, Resistance 0 40M?F, Frequency 0 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50? Before use, please check the machine shell first to check if there are cracked or any required plastic part is missing. Do not use instrument with broken shell. Special attention shall be paid to the insulating layer of test leads and connecting lines. When using test leads, do not touch the metal part of the probe of test leads with your finger.
Do not operate the multimeter in high-temperature, moist, rainy, inflammable and explosive environment or when the instrument is wet. When changing measuring function, please make sure the probe of test leads is taken away from the test point before plugging in/out the plug of test leads and before switching on/off the device. Pay attention to the safety warning signal displayed on the instrument: When the measured voltage exceeds the "safety voltage" (24V), a warning information will remind you.
When the voltage to earth on the reference end "COM" of the instrument reaches 500V, please do not make voltage measurement. Please do not make AC current measurement of circuits with a voltage of over AC 250V.
When measuring functions are pointed at the gears of current, resistance, continuity test, diode, capacitance etc. Never bridge the test leads over the two ends of the probe of voltage. Before the test of resistance, diode/continuity test, the power of the equipment to be tested must be cut off and make sure the capacitor of the circuit has been fully discharged.
Before opening the back cover of instrument for replacement of protective tube, the power of the instrument must be turned off and the test lead should be kept away from the circuit to be tested; protective tube of the same specification must be used for replacement. Do not alter or dismantle the product or its accessories or use them for purposes other than the purpose for which the product is designed.
No accessory and attachment may be replaced casually. Do not let children use this device or use it as a toy. Display 240 × 320 Color Screen Backlight Constantly on Power Supply 3 AA batteries Working Current About 65mA Use Time More than 10 Hours Use Temperature 0°C+40°C. Declaration Declaration: LM2020 oscilloscope multimeter does not have FFT function.
LM2020 Features Automatic Shutdown Double Protective Tube 10 Waveforms & 100 Sets of Date One-Key Transform to Waveform Function Dedicated Chip, More Accuracy and Efficiency Package Includes 1 x LM2020 Oscilloscope Multimeter 1 x English User Manual 1 x Portable Bag 2 x Test Leads 3 x AAA Batteries. We offer the best prices around on high quality products.
Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address.
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us!We're happy to help. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "nuribet_4" and is located in this country: US. This item can be shipped to United States.