U87 DIY Microphone Kit Vintage Neumann Quality Pro Full Replica Of The Original

  

U87 DIY Microphone Kit Vintage Neumann Quality Pro Full Replica Of The Original. Welcome to our DIY microphone kit page. These premium quality DIY kits are complete and ready to build, you will only need a soldering iron, a multimeter and time to get the best of vintage microphones at a great price! We make some of the most faithful reproductions of the original models that we offer voluntarily without brand or logo to allow the customer to customize them as he wishes!

We recommend simple soldering with fine wire. It is not necessary to use shielded wire. Copper or tinned copper will be perfect for your construction.

The external PSUs are already built and ready to use, they are delivered with a European cable which will have to be replaced for countries using different voltages, it will also be necessary to change the voltage on the case. Our DIY model Neumann U87 is the most faithful reproduction clone of the original, it features the most advanced FET on the model as Neumann still designs them today!

It also has 3 switches for sound settings such as Omnidirectional, Cardioid, Eight present on the original model.. Not forgetting its premium German Mylar K87 capsule, ideal for your big recording sessions. Includes a downloadable construction guide. It will allow you to follow step by step the construction of your kit. Our microphone kits are the perfect clones of Neumann, AKG, Telefunken and many other prestigious brands! We offer you the same sound, or even better, because we select the highest quality components! With the K87 capsule according to the original specifications, the sound of our kit is faithful to the original microphone found in the worlds largest studios. The perfect original U87 clone! The schematic is a full replica of the original microphone. It is a side-address, large-diaphragm design based on K87 capsule, the best FET, premiums componants and a T87 transformer-coupled output circuit.

All components are carefully matched and selected in our workshops. We attach great importance to the precision of our circuits to be as accurate as possible compared to the original. Included in the DIY Kit.

U87 Satin Headbasket 2 layers. T87 Output Transformer by Replica Microphones®. K87 Dual-Backplate Capsule by Replica Microphones®, German Gold Mylar.

Premium Silver U87 Shock Mount. Premium components (Styroflex, Wima, 1% resistor).

Gold 3 Pin XLR Connector. Directional Pattern : Omnidirectional, cardioid, figure-8. Sensitivity at 1 kHz into 1 kohm: 20/28/22 mV/Pa ± 1 dB (Omni/cardioid/8). Frequency Range: 20Hz - 20kHz.

Output Pad: 0dB, -10dB + Low Cut. Self-noise: 12.0 dB(A). The item "U87 DIY Microphone Kit Vintage Neumann Quality Pro Full Replica Of The Original" is in sale since Tuesday, May 18, 2021. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems".

The seller is "jyem687" and is located in Metz. This item can be shipped worldwide.

• Model: Neumann U87 Replica
• Country/Region of Manufacture: France
• Compatible Brand: Styroflex, Wima
• Maximum SPL: 127
• Connectivity: Gold 3 Pin XLR Connector
• Features: FET Circuitry
• MPN: Not Apply
• Diaphragm Size: Large
• Brand: Neumann Replica
• Form Factor: Dynamic Microphone U87 DIY Kit
• Suitable For: Studio Recording
• Polar Pattern: Omnidirectional, Cardioid, Bidirectional or figure